Symptoms Of Low Or High Blood Glucose; Comparing Your Meter Result To A Laboratory Result - Accu-Chek Guide Me User Manual

Hide thumbs Also See for Guide Me:
Table of Contents

Advertisement

Blood Glucose Tests
3

Symptoms of Low or High Blood Glucose

WARNING
The meter is designed to provide a numerical value for blood glucose in the range of
20–600 mg/dL.
Being aware of the symptoms of low or high blood glucose can help you understand your test
results and decide what to do if they seem unusual.
Low blood glucose (hypoglycemia): Symptoms of hypoglycemia may include, but are not limited
to, anxiety, shakiness, sweating, headache, increased hunger, dizziness, pale skin color, sudden
change in mood or irritability, fatigue, difficulty concentrating, clumsiness, palpitations, and/or
confusion.
High blood glucose (hyperglycemia): Symptoms of hyperglycemia may include, but are not
limited to, increased thirst, frequent urination, blurred vision, drowsiness, and/or unexplained
weight loss.
If you are experiencing any of these symptoms, or other unusual symptoms, test your blood
glucose from the fingertip. If your blood glucose result is displayed as LO or HI, follow your
healthcare professional's instructions or contact your healthcare professional immediately. If
your blood glucose result does not match how you feel, follow the steps in the Unusual Blood
Glucose Results section of this chapter.

Comparing Your Meter Result to a Laboratory Result

A common question is how the blood glucose results on the meter compare to the laboratory results. Your
blood glucose can change quickly, especially after eating, taking medication, or physical activity. If you
test yourself in the morning, then go to your healthcare professional's office for a blood glucose test, your
test results will probably not match, even if you are fasting. This is typically not a problem with the meter,
it just means that time has elapsed and your blood glucose level has changed.
Although you always apply fresh capillary whole blood to the test strip, the system has been calibrated to
deliver plasma-like values for easier comparison to laboratory results.
If you want to compare your meter result to the laboratory result, you must be fasting. Take the meter to
your healthcare professional's office and test yourself by fingerstick within 5 minutes of having blood
drawn from your arm by a healthcare professional. Keep in mind that the laboratory uses different
technology than the meter and that blood glucose meters for self-testing generally read somewhat lower
than the laboratory result.
24
1080_Guide Me_MANUAL_MASTER.indb 24
3/5/2018 1:27:51 PM

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Guide Me and is the answer not in the manual?

Questions and answers

Colleen Fletcher
February 2, 2025

I have replaced batteries according to the instructions, have checked and recked batteries are in correct positions, now, nothing comes up on screen

1 comments:
Mr. Anderson
February 10, 2025

The Accu-Chek Guide Me meter may not be turning on after replacing the batteries due to the following reasons:

1. Incorrect Battery Installation – Ensure that both CR2032 lithium batteries are inserted with the positive side facing up and properly positioned under the black tabs.
2. Loose Battery Door – The battery door must be securely snapped in place to hold the batteries correctly.
3. Old or Faulty Batteries – Make sure both batteries are new, from the same brand, and properly charged.
4. Damaged Battery Contacts – Check for any dirt or damage on the battery contacts inside the meter.
5. Meter Malfunction – If the issue persists, the meter may need to be reset or checked by customer support.

Try reinstalling the batteries correctly and ensuring the battery door is secure. If the problem continues, consider replacing the batteries again or contacting Accu-Chek Customer Care.

This answer is automatically generated

Delain D Horn
February 15, 2025

what is e-6

Doug Milton
March 15, 2025

Does the Accu Chek Guide Me glucose monitor have a reminder alarm system

KRISHNA MOHAN TANDON
April 1, 2025

what is error 9

Ron Tarpey
April 18, 2025

What is ERR code E-9

1 comments:
Mr. Anderson
May 9, 2025

The E-9 error code on the Accu-Chek Guide Me may still appear after changing the batteries. If it does, remove the batteries again, press the power button for at least 2 seconds, then reinsert the batteries.

This answer is automatically generated

Table of Contents

Save PDF