Setting The Time And Date - Accu-Chek Guide Me User Manual

Your New System
1

Setting the Time and Date

The meter prompts you to set the time and date the first time you turn the meter on or if an error occurs.
1
set-up
Set-up appears on the display
with the hour flashing.
Press or to decrease or
increase the hour.
NOTE
• Press and hold at any time until the flashing test strip symbol appears to perform a test.
• The time and date on the meter synchronizes to the time and date on the paired device each time the
meter sends data to the paired device.
12
1080_Guide Me_MANUAL_MASTER.indb 12
2
set-up
Press to set the hour and
move to the next field.
3
Repeat steps 1 and 2 to set
minutes, am or pm, month, day,
and year. Press until the
flashing test strip symbol
appears. Insert a test strip to
perform a test.
3/5/2018 1:27:46 PM