Appendix B : Accessories For Dso Series Digital Storage Oscilloscope; Appendix C : Maintenance And Cleaning - Tenma 72-8710 Operating Manual

DSO Series User Ma nual
Appendix B : Accessories for DSO Series Digital Storage
Oscilloscope
Standard Accessories :
Two 1.2m, 1:1(10:1) passive voltage probes. For details
please read the probe
standard.
Rating is 150V CAT II when the switch is in the 1X position;
Rating is 300V CAT II when the switch is in the 10X position.
One international standard power cord.
One User Manual.
DSO communication & control software.
USB connection cable : UT-D05.

Appendix C : Maintenance and Cleaning

manual. EN 61010-031:2008
General Care
Do not store or leave the oscilloscope where the LCD display will be
exposed to direct sunlight for long periods of time.
Caution : To avoid damage to the oscilloscope or probes, do not expose
them to sprays, liquids or solvents.
Cleaning
Inspect the oscilloscope and probes as often as operating conditions
require. To clean the exterior surface, follow these steps :
1. Remove dust on the outside of the oscilloscope and probes with a
soft cloth. When cleaning the LCD, use care to avoid scratching the
clear protection film of the LCD.
2. Use a dampened but not dripping soft cloth to clean the
oscilloscope. Remember to disconnect power. Use a mild cleaner
or water. To avoid damaging the product or probe, do not use
abrasive chemical cleaner.
Warning : To avoid short circuit or personal injury due to the
presence of moisture, please ensure the product is completely dry
before reconnecting power for operation.
87