maxon motor EPOS2 Module 36/2 Hardware Reference Manual page 6

About this Document
1.4 Symbols and Signs
In the course of the present document, the following symbols and sings will be used.
Safety Alert
Prohibited
Action
Mandatory
Action
Information
Table 1-2
1.5 Trademarks and Brand Names
For easier legibility, registered brand names are listed below and will not be further tagged with their
respective trademark. It must be understood that the brands (the below list is not necessarily conclud-
ing) are protected by copyright and/or other intellectual property rights even if their legal trademarks are
omitted in the later course of this document.
The brand name(s) ...
Adobe® Reader®
OMNI-BLOK®
SMD NANO2®
Pentium®
Windows®
Table 1-3
1-6
Type Symbol
(typical)
(typical)
(typical)
Symbols & Signs
... is/are a registered trademark(s) of ...
© Adobe Systems Incorporated, USA-San Jose, CA
© Littelfuse, USA-Chicago, IL
© Intel Corporation, USA-Santa Clara, CA
© Microsoft Corporation, USA-Redmond, WA
Brand Names and Trademark Owners
Document ID: rel7050
© 2017 maxon motor. Subject to change without prior notice.
Indicates an imminent hazardous situation. If not
DANGER
avoided, it will result in death or serious injury.
Indicates a potential hazardous situation. If not
WARNING
avoided, it can result in death or serious injury.
Indicates a probable hazardous situation or calls
CAUTION the attention to unsafe practices. If not avoided, it
may result in injury.
Indicates a dangerous action. Hence, you must not!
Indicates a mandatory action. Hence, you must!
Indicates an activity you must perform prior
Requirement /
continuing, or gives information on a particular item
Note / Remark
you need to observe.
Indicates an advice or recommendation on the
Best Practice
easiest and best way to further proceed.
Material Indicates information particular to possible damage
Damage of the equipment.
Edition: May 2017
Meaning
maxon motor control
EPOS2 Positioning Controller
EPOS2 Module 36/2 Hardware Reference