Configuring Management Settings; User Manager - Nortel Enterprise Edge 2.0 Programming Manual

Configuring Management Settings

The following shows the programming map for Management:
Management

User Manager

Alarm Manager
In Enterprise Edge Unified Manager, Management allows you to manage user and
alarm settings. Under the Management heading, Unified Manager displays the
following subheadings:
• User Manager, which displays the User Profile window showing a list of the
current Enterprise Edge user name and associated passwords and access
privileges. The User Profile window allows you to add, modify or delete any
user profile information.
• Alarm Manager, which displays the Alarm Database, SNMP Trap and the
Alarm Backup Batch Job windows. The Alarm Database window allows you to
modify event information collection parameters. The SNMP Trap window
allows you to enable or disable the sending of different SNMP traps. The Alarm
Backup Batch Job window allows you to enable or disable and to schedule
alarm backup batch job.
User Manager
Enterprise Edge comes with the following default user profiles:
• Manager Default password: "manager". Access privilege: Read-Write
• ModemBackup (North America only):
• supervisor: administrator type user, with "visor" as the default password
• TivDialup:
• user: read-only type user, with "user" as the default password
Note: After installation, change the all administrator type passwords.
P0911588 Issue 01
WARNING
Do not change the default ModemBackup and TivDialup passwords. If you
change the TivDialup password, Enterprise Edge cannot connect with Tivoli. If
you change the ModemBackup password, Enterprise Edge cannot make a
dialup network connection if NetLinkManager detects a break in the
permanent link.
Enterprise Edge 2.0 Programming Operations Guide
7