Nortel Enterprise Edge 2.0 Programming Manual page 361

Routing information for DPNSS network example
.
Heading
Private Network: (for each branch Enterprise Edge)
Routing Service
Public Network:
Routing Service
For more information on creating a private numbering plan with DPNSS, refer to
• Guidelines for creating a private numbering plan with DPNSS
• Customizing the routing service
Guidelines for creating a private numbering plan with DPNSS
Use the following guidelines when creating a private numbering plan with DPNSS.
• When creating HLCs for the nodes in your system, avoid numbering conflicts
between network nodes and internal DNs, Hunt Group DNs.
• Program a Private Access Code into your dest routing tables to avoid conflicts
with your internal HLC and dest code numbering plan. For example, if a dialout
HLC is 848, but this number already exists in the Norstar system for an
extension, the routing tables should add a Private Access Code to the dest code.
If the code is programmed as "6", the dest code becomes 6848. 6848 uses a
route to dial out 888 using the DPNSS line pool, allowing the call to be placed.
Note that a Private Access Codes is required only for specific DPNSS features
such as Diversion, Route Optimization, and Redirection.
P0911588 Issue 01
Parameter
Route 001
Dial out # No number
Use Pool N
DN type none (private access code 6 is programmed)
Destination Code 6
Normal route 001
Absorb 1
Route 002
Dial out # No number
Use Pool N
DN type public
Destination Code 9
Normal route 002
Absorb 1
on page 362
Enterprise Edge 2.0 Programming Operations Guide
Appendix A: Network Examples 361
Setting
on page 361