Nortel Enterprise Edge 2.0 Programming Manual page 82

82 Configuring Enterprise Edge Resources
1. Choose Resources, Media Bay Modules.
The window displays Buses 02 through 08.
2. Choose the bus (Bus 02 to 07) associated with the module you want to
provision.
Note: Bus 08 is reserved for a data module and has no lines to provision.
3. Expand the Modules on Bus heading.
The modules on this bus are displayed.
4. Choose the module (for example, Module 1) you want to provision.
5. Expand Provision lines.
All the available lines are displayed.
6. Choose the line you want to deprovision.
7. From the Status box, click Deprovisioned.
Disable a PRI Channel
PRI channels can be disabled; however, there is no association between a line
number and a B-channel. Disabling of a B-channel can be done when you have
fractional PRI. For more information, refer to
Enterprise Edge 2.0 Programming Operations Guide
Link Status on page 301.
P0911588 Issue 01