Call One Or More Enterprise Edge Telephones; Call Enterprise Edge And Select Tie Lines To Other Nodes In The Private Network - Nortel Enterprise Edge 2.0 Programming Manual

366 Appendix A: Network Examples

Call one or more Enterprise Edge telephones

The production supervisor in Houston selects the less expensive company tie line
to call the manager at the Administration office in Dallas. Once the line is selected,
the production supervisor dials the digits that will map onto the target line of the
manager in Dallas.
PBX in Houston
Hardware: Enterprise Edge, an EE-DTM with a T1 E&M line.
Heading
Incoming trunk:
Trunk/Line Data
Rec'd # length
Call Enterprise Edge and select tie lines to other nodes in the private
network
At a branch office, Joan selects a tie line to the main office downtown. After hearing
the dial tone, she dials a line pool access code to select another tie line to a branch
office in the next state.
Joan at
branch office
Hardware: Enterprise Edge, an EE-DTM with four T1 E&M lines
(3 lines in the line pool and 1 incoming line).
Heading
Incoming trunk:
Trunk/Line Data
Enterprise Edge 2.0 Programming Operations Guide
T1 E&M
Enterprise Edge
Parameter
Received #
Line 061
Answer Mode
Received # length
T1 E&M
key system
Parameter
Line 061
Answer mode
Manager in
Dallas
Target line
243
Setting
4321(for target line 243)
T1 E&M
Auto
4 digits (can be from 2 to 7 digits, but
must match number of digits sent by
central office)
T1 E&M line pool
to next state
Enterprise Edge
Setting
T1 E&M
Auto
P0911588 Issue 01