Nortel Enterprise Edge 2.0 Programming Manual page 140

140 Configuring Enterprise Edge Services
Schedules
Indicate how Ringing service should be activated for each of the schedules:
1. Choose Services, Telephony Services, Scheduled Services, Ringing service.
2. Choose Schedules. The navigation tree expands to show all the schedule
names.
3. Click on a schedule name (for example, Night). The schedule window
appears.
Service setting
4. Select whether the Service schedule is Off, Manual, or Auto.
Manual allows you to turn the service on and off at any time from a control set
using the Ringing service feature code.
Auto allows you to program a stop and start time for a service. You are still able to
start and stop the service by entering the appropriate Services feature code at a
control set. If you select this setting, you will have to set start and stop times. See
the section on schedule times for information on programming times.
Off prevents the service from being activated.
Trunk answer
Trunk answer allows you to answer, from any telephone, an external call that is
ringing at another telephone in your office. This is useful if the other telephones are
not assigned the same lines as the telephone you are using to answer the call.
5. Click Y or N to enable Trunk answer.
Extra dial set
The Extra dial set attribute allows you to assign an additional direct-dial set for each
schedule.
6. Enter the DN of the extra-dial set or choose None.
Enterprise Edge 2.0 Programming Operations Guide
Tip
You can change the Trunk Answer setting only if Ringing service is set to
Manual or Automatic.
Tip
The extra dial set is activated during a schedule by entering the Ringing service
feature code from a direct-dial set. This does not activate the Ringing service
unless the direct-dial set is also a control set.
P0911588 Issue 01