Adding Sap Filters For Ipx Routing; Adding Static Routes For Ipx Routing - Nortel Enterprise Edge 2.0 Programming Manual

214 Configuring Enterprise Edge Services

Adding SAP filters for IPX routing

On a Novell network, the Service Advertising Protocol (SAP) provides network
control information about available services on a Novell network. You can define
and add SAP filters for IPX routing.
1. Choose Services, IPX Routing and click on the interface that you want to
configure.
2. On the Configuration menu click Add SAP Input Filter or Add SAP
Output Filter.
3. Use the table below to set your SAP Input or Output filter parameters for IPX
routing:
Attribute
Input Filter
(SapIF#)
Output Filter
(SapOF#)
Service Type
Service Name
4. Click Save.

Adding Static Routes for IPX Routing

You can add static routes to the IPX routing table. The IPX static routes take
precedence over the routes added by routing protocol such as RIP.
1. Click on the IPX Routing key to expand the heading.
2. Click on the LAN or WAN interface that you want to configure. For example,
LAN1.
3. Under the Configure menu choose Add Static Route.
The Static Routes dialog box appears.
4. Configure the LAN1 (and WAN1, WAN2, etc.) static routing table attributes
according to the table below.
Enterprise Edge 2.0 Programming Operations Guide
Description
Allows you to give a number to the input filter you are creating.
Allows you to give a number to the output filter you are creating.
Allows you to specify the SAP service type. Use a 2 byte hexadecimal
number. You can use the value 0xFFFF to match services of any type.
Allows you to enter the service name. You can use a wildcard service name
such as "*" to indicate all service names.
P0911588 Issue 01