Moving Telephones - Nortel Enterprise Edge 2.0 Programming Manual

302 Maintenance
3. Select a service. For example, Public.
The display shows the settings for the selected service.
To clear the settings for a selected service, click Clear metrics on the
Configuration menu.
Hunt Group Metrics
This feature gives you statistical information on hunt group calls.
1. Choose Diagnostics, Service Metrics, Telephony Services, Hunt Group
Metrics.
All the Hunt Groups appear.
2. Click on a Hunt Group.
The display shows all the statistical information for the selected hunt group.
To clear the hunt group metrics, click Clear group on the Configuration menu.
PSTN fallback metrics
To view the metrics associated with VoIP calls that fallback to the PSTN network.
1. Choose Diagnostics, Service Metrics, Telephony Services, and click on the
PSTN fallback metrics heading.
The Last reset time, Fallback requests and Fallback failures values appear.
2. On the Configuration menu click Clear data and time to reset the metric
log.

Moving telephones

You can move a Enterprise Edge telephone to a new location within the system
without losing its programmed settings. Set relocation (automatic telephone
relocation) must be enabled in system programming. This makes the internal
numbers, autodial settings, and personal speed dial codes remain with the telephone
when it is unplugged.
Automatic telephone relocation is disabled by default. Use the following procedure
to enable set relocation.
1. Choose Resources, Services, Telephony Services, General settings, and
click on the Feature settings heading.
2. In the Set relocation box, select Y from the pull-down menu.
Enterprise Edge 2.0 Programming Operations Guide P0911588 Issue 01