Wan Performance; Dial Up; Configuring Ras Server Tcp/Ip - Nortel Enterprise Edge 2.0 Programming Manual

58 Configuring Enterprise Edge Resources
Attribute
Cisco's Encapsulation
Mode
2. Press the Tab key to save your settings.

WAN performance

To access the WAN Primary Link performance graphs and tables for a particular
WAN interface:
1. In the navigation tree, select WAN1 or WAN2.
2. On the menu, click Performance, WAN Graph.
The WAN Graph: Statistic Chart appears.
3. On the menu, click Performance, WAN Table.
The WAN Table: Statistic Table appears.

Dial Up

Enterprise Edge lets you create and use dial up connections for Remote Access
Service (RAS) or dial-on-demand network access. RAS lets you access Enterprise
Edge remotely by making an IP connection using an ISDN BRI/PRI line or the
Enterprise Edge V.90 modem (North America). Once connected to the Enterprise
Edge system, you can access all IP-based system management operations.
Enterprise Edge also supports dial-on-demand for primary and backup WAN
connections. Primary and backup WAN connections can use an ISDN BRI/PRI line
or a V.90 modem (North America).

Configuring RAS Server TCP/IP

1. Click the Resources key to expand the navigation tree.
2. Click Dial Up.
The RAS Server TCP/IP Configuration screen appears.
3. Use the following table to configure the RAS Server TCP/IP settings:
Attribute
Allow Network Access
Enterprise Edge 2.0 Programming Operations Guide
Description
Lets you enable or disable the Cisco compatibility mode.
Description
Lets you give dial up access to the entire network (Yes) or to restrict
access to Enterprise Edge only (No).
When using dial up for dial-on-demand WAN connection (as a primary
or back up WAN connection), set Allow Network Access to Yes.
When using dial up for remote system management purposes only, set
to No.
P0911588 Issue 01