Technical appendix
NOTICE!
•
Use the following diagram if the load current is known.
Fig. 38 Internal response time as a function of the minimum load current
NOTICE!
•
Use the following diagram if the load resistance is known.
Fig. 39 Internal response time as a function of the resistive minimum load
Deviating safety characteristic values when test pulses are switched off
Min. request rate for each output channel (CH0,
CH1, CH2)
1) With the exception of the values specified here, the safety characteristic values retain their validity.
Tab. 48 Deviating safety characteristic values when test pulses are switched off
96
I
[mA]
Last
R
[Ohm]
Last
[1/day]
1)
1
Festo — CPX-FVDA-P2 — 2018-10b