Festo CPX-FVDA-P2 Original Instructions Manual page 58

Installation
NOTICE!
In order for output modules with manifold block CPX-M-AB-4-M12X2-5POL to comply with degree of
protection IP65/IP67:
• Use the specified plugs from the accessories (è www.festo.com/catalogue) to connect the actu-
ators.
• Tighten the union nuts of the plugs by hand.
• Use cover caps ISK-M12 (accessories) to seal unused bushings.
NOTICE!
In order for output modules with manifold block CPX-AB-8-KL-4POL to comply with degree of protec-
tion IP65/IP67:
• Use the specified covering from the accessories (è www.festo.com/catalogue) for sealing.
NOTICE!
The cross-circuit monitoring function only monitors the device's own circuits.
• Ensure that cross-circuiting to other circuits is not possible using appropriate installation meas-
ures.
58 Festo — CPX-FVDA-P2 — 2018-10b