Festo CPX-FVDA-P2 Original Instructions Manual page 31

System overview CPX-FVDA-P2
– Operation of switch-off groups in CPX terminals in the Remote I/O mode of operation is only
allowed with the following approved output modules:
Output module
CPX-4DA
1)
1)
CPX-8DA
1)
CPX-8DA-H
1)
CPX-8DE-8DA
1) Malfunctions may occur if the resultant current is exceeded.
Tab. 19 Permissible output modules
Further information about the supported product versions can be found in the description of the valve
terminal VTSA-F-CB.
Detailed information about the product, the supported product versions and required software ver-
sions as well as the permissible components of the CPX terminal can be found in the system descrip-
tion CPX-SYS-... è www.festo.com/pk.
Information about permissible configurations of the CPX terminal in combination with the output mod-
ule can be found in the catalogue è www.festo.com/catalogue.
Festo — CPX-FVDA-P2 — 2018-10b 31