Festo CPX-FVDA-P2 Original Instructions Manual page 27

System overview CPX-FVDA-P2
Electronics module
The electronics module includes the electronic components of the output module. It is connected to
the interlinking block and the manifold block by means of electrical plug connectors. The PROFIsafe
address can be set directly on the electronics module using a DIL switch
(è 3.4 Setting the PROFIsafe address).
Electronics mod- Type
ule
CPX-FVDA-P2
1) All the modules supplied via the load voltage supply UVAL of the CPX terminal are switched off in two channels on the P-side and M-
side.
2) The connected external consumers are switched off in two channels on the P-side and M-side. Output channels 1 and 2 (CH1, CH2) are
supplied from UVAL.
Tab. 12 Electronics module
Festo — CPX-FVDA-P2 — 2018-10b
Description
– One digital output channel CH0 for switching
off the load voltage supply U
of the CPX terminal
– Two digital output channels CH1 and CH2
– Control of the digital output channels with
safety-related PLC via PROFIsafe
– Status and error display per output channel
– Module error display
– Max. load current at CH0, CH1 and CH2
( 8 Technical appendix).
è
– Electronic fuse as short-circuit protection
– A mechanical coding prevents the electronics
module from being plugged into impermiss-
ible interlinking blocks.
in the linkage
VAL
1)
2)
27