System overview CPX-FVDA-P2
Interlinking block
The interlinking block CPX-M-GE-EV-FVO provides the mechanical and electrical linkage to the CPX ter-
minal.
Interlinking block
Type
CPX-M-GE-EV-FVO
1) To the right of the output module, a UOUT is no longer available via the contact rails.
Tab. 13 Interlinking block
It is not permitted to use different interlinking blocks for CPX-FVDA-P2.
Pneumatic interface
The pneumatic interface VABA-S6-1-X...-F1/F2-CB provides the mechanical and electrical linkage to
the valve terminal VTSA-F-CB.
Interlinking block
Type
VABA-S6-1-X...-F1-CB
VABA-S6-1-X...-F2-CB
1) Fig. shows this version
2) To the right of the output module, a UOUT is no longer available via the contact rails.
Tab. 14 Pneumatic interface
It is not permitted to use different pneumatic interfaces for CPX-FVDA-P2.
28
Description
Special metal interlinking block for CPX-FVDA-P2
(without supply)
–
Interrupts all contact rails for load voltage
supplies (U
–
The contact rails for the load voltage supply
U
are closed or interrupted via the output
VAL
module
–
The contact rails for U
–
Mechanical coding prevents you from plug-
ging in impermissible modules
Description
Special pneumatic interface for CPX-FVDA-P2
(without supply)
1)
–
Interrupts all circuits for the load voltage sup-
ply (U
)
VAL
–
The circuits for the load voltage supply U
are closed or interrupted via the
CPX-FVDA-P2
–
The circuits for U
and U
)
VAL
OUT
remain interrupted
OUT
remain interrupted
OUT
Festo — CPX-FVDA-P2 — 2018-10b
1)
VAL
2)