Festo CPX-FVDA-P2 Original Instructions Manual page 78

Commissioning
Fig. 29 Standard parameters of the output module CPX-FVDA-P2
The fourth tab of the "Properties – FVDA-P2" dialogue window offers access to the PROFIsafe paramet-
ers of the output module.
– Set the correct PROFIsafe target address under [F_Dest_Add] (è Fig.30). The setting must match
the DIL switch setting on the module (è Fig.25).
You can find detailed information about the individual parameters in
è 4.4 Setting the PROFIsafe parameters.
Fig. 30 PROFIsafe parameters
78 Festo — CPX-FVDA-P2 — 2018-10b