Table of Contents
Advertisement
Features of the DVS-7250 I/O Expansion System
Powerful remote control functions
You can connect the BKDS-2010 Control Panel to the DVS-7200A and use it
as a separate panel exclusively for the M/E banks. For key adjustment
operations such as chroma key adjustment, the BKDS-7060 Keyer Remote
Control Panel is available. You can use the dedicated panel connected to the
DVS-7200A to remote-control the auxiliary bus and Shot Box operations.
Role of the DVS-V6464M or HDS-X3600 as an I/O
Expansion Unit
In this system, the DVS-V6464M or HDS-X3600 is included as a part of the
switcher system, providing the primary inputs, cross-point switching, and
auxiliary bus expansion functions. Thus the DVS-V6464M or HDS-X3600
serves as a dedicated unit for expanding the inputs and outputs. It cannot also
be used for its standard function as a routing switcher. In particular, the S-
BUS interface is dedicated as the interface to the DVS-7200A. If you attempt
to use an S-BUS interface to another routing switcher system, this system
will no longer operate correctly.
Input and Output Signals to the DVS-7250 I/O
Expansion System
The principal input/output signal names and the devices and connector names
are shown in the following table.
Signal names
Primary inputs 1 to 60
Auxiliary outputs 1 to 8
Auxiliary outputs 9 to 28
Assignable outputs 1 to 5 DVS-7200A
The signal names and connector names correspond one-to-one. For example, the signal name
"Primary input 1" corresponds to the connector named "INPUT 1."
For other inputs and outputs, refer to the Operation Manual for the relevant device.
1-8
Chapter 1 Overview
Device
DVS-V6464M or HDS-X3600
DVS-7200A
DVS-V6464M or HDS-X3600
Connector names
INPUT 1 to 60
AUX BUS OUTPUT 1 to 8
OUTPUT 45 to 64
AUX BUS OUTPUT 9 to 13
Advertisement
Table of Contents
