Basic Operation For Wipe Settings - Sony DVS-7250 Operation Software

I/o expansion system

Hide thumbs Also See for DVS-7250:

Table of Contents

Basic Operation for Wipe Settings

Most wipe settings are carried out in a dedicated menu for the bank

This section describes the basic wipe setting operations.

Accessing the wipe setting menus

For example, to access the M/E-1 WIPE 1 menu, use any of the following

• Press the WIPE top menu button in the M/E-1 group of the menu control

• Press the WIPE button in the transition control section of the M/E-1 bank

After any of these operations, the M/E-1 WIPE menu shown below appears.

See the page numbers indicated in parenthesis for more details of the settings.

Wipe pattern selection

(see page 4-72)

Wipe direction and position

setting (see page 4-75)

Pattern edge modification

(see page 4-75)

Main pattern rotation and

other settings (see page 4-80)

Subsidiary pattern rotation

and other settings

(see page 4-80)

The M/E-2 WIPE and PGM/PST WIPE menus are similar in appearance.

The following description always takes the M/E-1 WIPE menu as an example

for basic wipe setting operations.

Chapter 4 Basic Operations for Image Creation

twice in rapid succession.

Example M/E-1 WIPE menu display