Table of Contents
Advertisement
Assigning functions to the UTILITY buttons (UTILITY menu)
To assign menu recall or command execution functions to the 14 UTILITY
buttons and 32 buttons on the BKDS-7033 Memory Recall Control Panel
Unit installed in the switcher control panel, use the following procedure.
1
In the OPERATION menu press F9 (UTILITY).
The UTILITY menu appears.
USER
MENU
F1
2
Press one of F1 to F5 to select the type of function to be assigned.
F1 (USER MENU): Access a frequently used submenu.
F2 (TOP MENU): Access the DME or other top menu.
F3 (COMMAND): Toggle a particular function on and off.
F4 (SHOTBOX): Memory recall
F5 (CLEAR): Cancel the function assignment.
All of the UTILITY buttons and 32 buttons on BKDS-7033 flash.
If you selected F5 (CLEAR), skip to step 4; otherwise advance to step 3.
3
Depending on the function you selected in step 2, operate as follows.
• If in step 2 you selected F1 (USER MENU), display the submenu you
wish to assign.
• If in step 2 you selected F2 (TOP MENU), press F7 (MENU SELECT)
or turn control knob 3 to align the cursor with the top menu you wish to
assign.
• If in step 2 you selected F3 (COMMAND), press F7 (COMMAND
SELECT) or turn control knob 3 to align the cursor with the command
you wish to assign.
• If in step 2 you selected F4 (SHOTBOX), press F7 (SHOTBOX
SELECT) or turn control knob 3 to align the cursor with the SHOT
BOX number you wish to assign.
TOP
MENU
COMMAND
SHOTBOX
CLEAR
F2
F3
F4
F5
Function key indications in the UTILITY menu
MENU
SELECT
#3
F6
F7
F8
F9
(Continued)
Chapter 14 Setup
DEFAULT
LEARN
F10
14-73
Advertisement
Table of Contents
