Table of Contents
Advertisement
Key Frame Control Section (BKDS-7030 Key Frame Control Panel
Unit – Option)
PASTE button: Pressing this button
inserts the key frame from the paste
buffer into the current position where
the effect is stopped.
If the effect is stopped at a key frame,
the insertion point is determined as
follows.
• When this button only is pressed,
the insertion is immediately after
the current key frame.
• When this button is pressed with the
SHIFT button held down, the
insertion is immediately before the
current key frame.
DELAY button: Press this button to set
the delay from the position of the first
key frame to the start of the effect
using the numeric keypad.
MOD (modify) button: Writes the
current working key frame buffer to
the current key frame. When the
effect is stopped between frames, the
immediately previous key frame is
rewritten.
If a range is specified with the FROM
TO button, all key frames in this
range are rewritten together.
FROM TO button: To copy, delete or
modify a number of key frames
together, first press this button, and
input the key frame numbers to
specify a range.
DEL (delete) button: This deletes the
current key frame. When the effect is
stopped between frames, the
immediately previous key frame is
deleted. If a range is specified with
the FROM TO button, all key frames
in this range are deleted.
2-30
Chapter 2 Location and Function of Parts
INS (insert) button: While the effect is
stopped, this inserts a new key frame.
If the effect is stopped at a key frame,
the insertion point is determined as
follows.
• When this button only is pressed,
the insertion is immediately after
the current key frame.
• When this button is pressed with the
SHIFT button held down, the
insertion is immediately before the
current key frame.
GO TO TC (time code) button: Press
this button, then enter a time code
value from the numeric keypad, to go
to that time code position.
GO TO KF (key frame) button: Press
this button, then enter a key frame
number from the numeric keypad, to
go to that key frame.
SHIFT button: Holding down this
button changes the effect of the INS
and PASTE buttons.
PREV KF (previous key frame)
button: Moves back to the last key
frame before the current position.
NEXT KF (key frame) button: Moves
forward to the next key frame after
the current position.
2 Effect execution section
STOP NEXT KF (key frame) button:
When this button is lit, the effect up
to the next key frame is executed.
REV (reverse) button: When this
button is lit, the effect is executed in
the reverse direction.
Advertisement
Table of Contents
