Installation And Device Setup (Install/Unit Config Menu); Installing Software - Sony MVS-6000 User Manual

Installation and Device Setup (Install/Unit
Config Menu)
To install software or firmware in a device, use the System >Install/Unit
Config menu.
This installs the software and firmware in all devices (including the DCU)
connected to the Data LAN.
To display the Install/Unit Config menu
In the Engineering Setup menu, select VF1 'System' and HF6 'Install/Unit
Config.'
The status area shows the version of the software and the firm ware installed in
each device.
The following functions are available here.
Install: Automatically detects the software that can be installed on each device,
Detail Information: Gives details of the software and firmware installed in
Unit Config: Carries out switcher processor settings. Selects whether or not to
License: Makes the license valid or invalid.
Displaying installation details
In the System >Install/Unit Config menu, press [Detail Information].
This accesses the Detail Information menu, and displays the detailed
information on the software and firmware installed in the currently selected
device.

Installing Software

1
2
30

Installation and Device Setup (Install/Unit Config Menu)

and installs the selected software.
each device.
save frame memory clips with ancillary data.
Insert the memory card holding the software into the memory card slot.
In the System >Install/Unit Config menu, press [Install].
The Install menu appears; the status area shows the following information.
Upper list: For each connected device, this shows the device name,
current software version (Current), and the latest version that can be
installed (Install, Title).