Table of Contents
Advertisement
Changing switcher functions (OPERATION MODE menu)
You can use the OPERATION MODE menu for the following settings.
• Setting the background transition flip-flop mode: Toggle between the
bus flip-flop mode ("ON" setting) and bus fixed mode ("OFF" setting)
for carrying out background transitions.
• Setting the downstream keyer auto drop function: Select whether the
downstream keyer (DSK1/2) specified in the menu is automatically
switched off when a cross-point button in the PGM row of the PGM/PST
bank is pressed.
OFF: Pressing a cross-point button in the PGM row does not of itself
turn the downstream keyer off.
ON: The downstream keyer auto drop function is enabled. Simply
pressing a cross-point button in the PGM row automatically turns the
corresponding downstream keyer off.
• Setting the cross-point button shift function: Select the cross-point button
shift function setting from the following.
RIGHT: The shift function is enabled with the rightmost button (button
28) as the shift button.
LEFT: The shift function is enabled with the leftmost button (button 0)
as the shift button.
OFF: The shift function is disabled.
• Settintg the cross-point shift button lock/unlock function: Whether or
not the shift button locks when pressed.
OFF: The shift button does not lock. That is, to shift a cross-point button
selection, you must always hold down the shift button.
ON: When you press the shift button it lights, and locks, shifting the
cross-point button selection. To release the lock, press the shift
button once more.
When the signal selection in the bank changes with the progress of
the transition, the state of the shift button automatically changes so
that the cross-point button for the currently selected signal lights.
HOLD: The shift button locks as described above for the ON setting, but
the state of the shift button does not change with the progress of the
transition.
14-57
Chapter 14 Setup
Advertisement
Table of Contents
