Power Supply Unit Status Indicators; Specifications; Mvs-8000G Multi Format Switcher Processor - Sony MVS-8000G-C Operational Manual

Power Supply Unit Status
Indicators
The power supply unit status indicators show the status of
the power supply unit during operation and when the unit
is powered on. Whenever a power error is detected, it is
reflected immediately by the indicator.
Meaning of status indicator displays
Indicator Status Description
color
Green Lit Operating normally
Red LIt Power supply unit fan
fault
−
Not lit Power supply unit
fault
Note
When the unit is powered on, the status indicators may
light momentarily in red and a whining sound may be
heard. This is not a malfunction. Power all of the installed
power supply units on.

Specifications

The following specifications show the reference
performance for this unit and individual option boards/
units.
Design and specifications are subject to change without
notice.
MVS-8000G Multi Format Switcher
Processor
Steps to take
−
General
Exchange the
fan unit Power requirements
Exchange the
Current consumption
power unit
Peak inrush current
Operating temperature
Performance guaranteed temperature
Storage temperature
Operating humidity
Dimensions (w/h/d, excluding projections)
Mass
Remote control connectors
CTRL
DATA
REMOTE 1, 2, 3, 4
GPI
100 to 240 V ±10% AC, 50/60 Hz
100 V: 12 A, 240 V: 5 A
(1) Power ON, current probe method:
100 A (100 V), 180 A (240 V)
(2) Hot switching inrush current,
measured in accordance with
European standard EN55103-1:
165 A (230 V)
5ºC to 40ºC (41ºF to 104ºF)
10ºC to 35ºC (50ºF to 95ºF)
−20ºC to +60ºC (−4ºF to +140ºF)
10% to 90%
482×354×520 mm
1
(19×14×20 / inches)
2
Approx. 49 kg (108 lb)
(when equipped with all installable
option boards and option power supply
unit)
RJ-45, complies with 100Base-TX
standard
RJ-45, complies with 100Base-TX
standard
D-sub 9-pin, female
Comply with RS-422A standard
Data transfer rate: 38.4 Kbps
D-sub 25-pin, female
TTL inputs: 8
Power Supply Unit Status Indicators / Specifications
17