Table of Contents
Advertisement
10
Press F4 (ENABLE BUS).
The ENABLE BUS menu appears.
REGION
SELECT
#2
F1
Function key indications in the ENABLE BUS menu (when M/E-1/2 is selected)
11
Press F1 (REGION SELECT) or turn knob 2 to align the cursor with the
bank (M/E-1, M/E-2, etc.) you wish to select.
The function key indications for F2 and subsequent keys change to show
the bus names, according to the bank with which the cursor is aligned.
12
Press the function keys corresponding to the buses, making the keys be
displayed in reverse video to enable the link to the GPI output port, or
making them be displayed in normal video to disable the link.
Adjusting the trackball and Z-ring (TRACK BALL menu)
This menu adjusts various functions of the trackball and Z-ring on the
BKDS-7031 DME Control Panel Unit (DME control section).
Selecting the speed of image movement
This selects the speed of movement of the image under trackball and Z-ring
control.
1
In the OPERATION menu press F8 (TRACK BALL).
The TRACK BALL menu appears.
F1
PST
K1 BUS
K2 BUS
PGM
F2
F3
F4
F5
3D
MOVEMNT
X1
F2
F3
F4
Function key indications in the TRACK BALL menu
UTIL
F6
F7
F8
FINE
VELOCTY
MODE
HOLD
/2
X1
F5
F6
F7
F9
F10
XY MOVE
SNSTVTY
CONST
F8
F9
F10
(Continued)
14-71
Chapter 14 Setup
Advertisement
Table of Contents
