Table of Contents
Advertisement
2 Bus tally indicators
These light when the signal from the
corresponding bus (row of cross-point
buttons) forms part of the output from the
M/E bank.
3 Source name display (BKDS-7025
only)
This shows the identifiers of source
signals. When there are two signals
assigned to a cross-point button column,
hold down the SHIFT button on the right
to show the identifiers assigned to the
shifted buttons.
The identifiers assigned to the shifted
buttons are also shown while the "shift"
button in the cross-point button row is held
down.
If you are using the switcher and a DVS-M
series routing switcher connected by a
BKDS-7700, the signal names selected on
the routing switcher can be displayed.
2-7
Chapter 2 Location and Function of Parts
Advertisement
Table of Contents
