Sony DVS-7250 Operation Software page 25

I/o expansion system

Hide thumbs Also See for DVS-7250:

Table of Contents

Peripheral 2 timeline

For all of the devices, with a device ID of 0 to 23, valid in the PERIPHERAL

II protocol, LEARN, RECALL, and TRIGGER commands can be

individually assigned on the timeline, and executed as effects. By using a

device controller such as DNF CONTROLS equipped with a PERIPHERAL

II interface, you can carry out timeline control on a VTR, disk recorder, MD

player, or other device. At the same time it is possible to assign PANEL GPI

OUT to the timeline.

For details, see page 8-35.

Chapter 1 Overview