Table of Contents
Advertisement
STILL FILE
3
4
5
6
7
6-20
Chapter 6 Frame Memory
Select the frame memory to be used for saving or loading.
F7 (FMEM1): Frame memory 1
F8 (FMEM2): Frame memory 2
Enter the file number for the save or load, using the numeric keypad, and
press the ENTER button.
Press the F10 (EXEC) button.
• If in step 2 you pressed F1 (SAVE), the menu screen changes so that
you can enter a file name. In this case, skip to step 7.
• If in step 2 you pressed F2 (LOAD), the function key indications
change to F9 (YES) and F10 (NO). In this case, continue to step 6.
To execute, press F9 (YES).
To cancel the operation, press F10 (NO).
Using the keyboard that appears on the screen and the numeric keypad,
enter a name of up to eight characters, then press F9 (ENTER) or the
ENTER button on the numeric keypad to confirm the name. If you do not
need to change the name, simply press F9 (ENTER) or the ENTER
button on the numeric keypad.
For details of name entry, see page 3-11.
Note
A load operation is only possible if the frame memory mode is set to
MANUAL or PAINT. In other modes a load operation is inhibited.
Advertisement
Table of Contents
