Sony DVS-7250 Operation Software page 126

I/o expansion system

Hide thumbs Also See for DVS-7250:

Table of Contents

After setting the parameters, to return to the EDGE menu, press the EXIT

Chapter 4 Basic Operations for Image Creation

To soften the edge, press F7 (SOFT EDGE), turning it on, and adjust the

degree of softness.

When you selected a "normal" edge, drop border, or shadow in "4H

DROP OFF" mode, the edge softening function is not available.

For details of "4H DROP OFF" mode, see "Edge types and key fill/key

source positions" (next page).

When you selected a color matte as the edge fill signal, press F10

(MATTE ADJUST) to make the matte adjustments.

The EDGE MATTE menu appears.

Function key indications in the EDGE MATTE menu

If you do not wish to use the color mix function, press F1 (FLAT),

turning it on, and set the parameters for matte 1.

For details of the operations for using the color mix function, see the

Set the degree of edge softness (0.00 to 100.00)

Set luminance (0.00 to 100.00)

Set saturation (0.00 to 100.00)

Set hue (0.00 to 359.99)