Installing The Expansion Board; Installing The Driver Software - Sony ESBK-7052 Operating Instructions Manual

Installing the Expansion Board

For installation, refer to "Installing Expansion Boards in ISA
Slots" in Chapter 3 "Connections and Settings" in the
Operating Instructions supplied with the ES-7 EditStation.
Be sure to power the ES-7 off before installing this board.

Installing the Driver Software

To use the expansion board, you will need to start the system
and install the driver software. When you start the system, be
sure to log on with the user name and password of a member of
the Administrators group.
To install the driver software, proceed as follows.
1
2
.....................................................................................................................................................................
1) Windows NT is a trademark of Microsoft Corporation.
Note
Log on following the procedure explained in "Starting the
System" in the ES-7 Operating Instructions.
The desktop appears on the screen.
Insert the Windows NT
ROM disc supplied with the ES-7 into the CD-ROM drive
of the ES-7.
1)
Workstation Version 4.0 CD-
(Continued)
19