Table of Contents
Advertisement
Switch S3 (TEST): 0
Switch S4
Bit No
1(SYNC/ASYNC)
2(M/S)
3(TERMINAL/ISR)
4
Terminal setting initialization
After making the above switch settings, be sure to carry out the following
procedure.
If a backup CPU board is installed, carry this out with one CPU board
removed, and carry out the same procedure for each of the CPU boards.
1
Set the rotary switch S3 (TEST) on the CPU board to the D position.
2
Press the RESET button, to initialize the settings.
3
Return the rotary switch S3 (TEST) on the CPU board to the 0 position.
Once the procedure has been completed for both boards, reinstall the boards
as originally.
HDS-X3600
CPU board switch settings
Switch S1 (STATION ADDRESS)
Bit No
1
2
3
4
5
6
7
8
The above settings are for the case in which the "Station No." is 2.
Setting
OFF(SYNC)
OFF(S)
OFF(TERMINAL)
OFF
Setting
0(CLOSE)
1(CLOSE)
0(CLOSE)
0(CLOSE)
0(CLOSE)
0(CLOSE)
0(CLOSE)
0(CLOSE)
1-11
Chapter 1 Overview
Advertisement
Table of Contents
