2-1. DVS-7200A
2-1-2. Replacement of Power Unit
2-1-2. Replacement of Power Unit
w
Allow for more than five minutes interval after turning the power off, remove the power unit.
To avoid shock hazards, never remove the power unit just after turning the power off.
(1) Remove the front panel. (Refer to the section 1-1-1.)
(2) Remove the four screws securing the power unit.
(3) Hold the handles and pull out the power unit from the unit.
Power unit
PWH4 x 6
PWH4 x 6
Handles
(4) Install a new power unit in the reverse order of the procedures (1) through (3).
2-3
DVS-7200AE MMP1