Table of Contents
Advertisement
To carry out these settings, use the following procedure.
1
In the SYSTEM menu, press F3 (SYSTEM SETUP).
The SYSTEM SETUP menu appears.
SIGNAL
FORMAT
DATE
TIME
F1
F2
F3
Function key indications in the SYSTEM SETUP menu
2
Carry out the operation in the following table to make the required
setting.
Setting
Setting the date
Setting the time
Selecting the signal format
Toggling the 7.5 IRE setup on
or off (D2-525 systems only)
Setting the screen aspect
ratio
Selecting the video switching
timing
Selecting the state at power
on
Setting the buzzer
7.5
SCREEN
SWITCH
SETUP
FORMAT
TIMING
RESUME
OFF
ANY
F4
F5
F6
Operation
Press F1 (DATE), then enter the date from the
numeric keypad, in the American order (mm-dd-
yy), but separating the items by periods.
For example, to set the date to 5th December
1995, enter "12.5.1995" then press the ENTER
button.
Press F2 (TIME), then enter the time (hh:mm:ss)
from the numeric keypad, using the 24-hour clock
and separating the items by periods.
For example, to set the time to 14:25:20, enter
"14.25.20" then press the ENTER button.
Go to step 3.
Go to step 3.
Go to step 3.
Press F6 (SWITCH TIMING).
This cycles the setting through ANY, EVEN and
ODD (D2 systems)/ANY, F1 and F2 (D1
systems).
Press F7 (RESUME) or F8 (PANEL RESUME).
This toggles the setting on and off.
Press F9 (ALARM).
This toggles the setting on and off.
PANEL
ALARM
RESUME
OFF
OFF
F7
F8
F9
F10
(Continued)
Chapter 14 Setup
14-7
Advertisement
Table of Contents
