Chrysler Stratus RHD 1999 Electronic Service Manual page 312

JA
REMOVAL AND INSTALLATION (Continued)
Fig. 6 Fuel Gauge and Temperature Gauge
Fig. 7 Headlamp Leveling Switch
(3) Pull the headlamp leveling switch out from the
instrument cluster hood far enough to disengage the
wiring connector.
(4) Remove the switch from the instrument cluster
hood.
INSTALLATION
Reverse the preceding operation.
INSTRUMENT PANEL AND GAUGE
SPEEDOMETER/TACHOMETER AND ODOMETER
TRANSMISSION RANGE INDICATOR
REMOVAL
(1) Remove mask/lens
remove mask/lens (Fig. 3).
(2) Disconnect odometer/transmission range indi-
cator connector from the printed circuit board (Fig.
4).
(3) Remove screws attaching speedometer/tachom-
eter to housing.
(4) Remove screws attaching from the back of
speedometer and remove the odometer/transmission
range indicator display (Fig. 8).
INSTALLATION
For installation, reverse the above procedures.
Fig. 8 Odometer/Transmission Range Indicator
8E - 3
retaining screws and