9 - 38
2.0L SOHC ENGINE
REMOVAL AND INSTALLATION (Continued)
Fig. 56 Timing Belt Cover
TIMING BELT—WITH HYDRAULIC TENSIONER
CHECKING BELT TIMING—COVER INSTALLED
• Remove number one spark plug.
• Using a dial indicator, set number one cylinder
to TDC on the compression stroke.
• Remove the access plug from the outer timing
belt cover (Fig. 57).
• Check the timing mark on the camshaft
sprocket, it should align with the arrow on the rear
belt cover (Fig. 58).
Fig. 57 Timing Belt System
Fig. 58 Camshaft Timing Marks
JA