(VI) Seat Removal, Installation and Adjustment
Front Seat
See Figure
1.Headrest Assembly
5.Front Seat Back Cover
8.Track Assembly
11.Adjuster Assembly
1. Removal
1
Remove 4 bolts and the seat from the vehicle;
2
Turn the headrest lock handle to"Non-LOCK". Remove headrest and bracket;
3
Remove the attaching screw, Remove adjuster hinge cover from the front seat;
4
Remove the 4 snap ring under the rear side of the seat back. Remove the set bolt and nut at the both side
of the seat back;
5
Remove seat coupling plastic gasket;
6
Remove the seat cushion, track assembly and adjuster assembly;
7
Press the headrest support and push it upwards by hand in the direction as the Figure shows and remove
the headrest support;
8
Open the seat backcover. Remove the inner coversnap ring. Remove the seat backcover;
Disassembly of Front Seat
2. Headrest Support
6.Cap Nut
9.Front Seat Cushion Cover
12.Adjuster Hinge Cover
3.Snap Ring
4.Front Seat Backassembly
7.Front Seat Coupling Plastic Gasket
10.Front Seat Cushion Assembly
331