III. ALTERNATOR INSPECTION
1. INSPECT ALTERNATOR
Stator
Pulley
(a) Inspect the rotor winding
1
Inspect the resistance of the rotor winding
Place the multimeter at R x 1, connect 2 pens and 2 slip
rings of the rotor.
Standard resistance: 2.7---3.1
2
Inspect the rotor bending
Standard: less than 0.5 mm of radial motion
If it is not normal, calibrate or replace the rotor.
Rotor Winding Inspection
Rotor
Bearing Retainer
Bearing
Wire Clamp
Gasket Rectifier Frame
Structure of Alternator
Ω
¸
Bearing Cover
Bearing
Brush
IC Regulator
Brush
Holder
Connecting Insulator
Rear Cover
Brush
Holder
Cover
169