V LH
Central of the Headlamp
NOTICE:
The screw must be tightened when adjusting the headlamps. If it needs loosening for adjusting, you should
completely loosen it and then begin to tighten it.
(1) Adjust the positions of the screw bolts, as shown in the illustration below.
Turn A for adjustment in horizontal direction within an allowed scope.
Turn B for adjustment in vertical direction within an allowed scope.
A
214
V-line
Central of the Headlamp
Corner Point of
Dim and Bright
the "Cut-off" Line
Cut Line Angle
B
V RH