Geely CK Series 2007 Workshop Manual page 191

Standard:
Tester connection
B5 - ground
Result and solution:
Normal Replace the combination meter assembly
If abnormal inspect the water temperature sensor
2
Inspect the water temperature sensor
Remove the water temperature sensor and put it into the constant temperature cabinet.
Adjust the temperature in the constant temperature cabinet and measure the resistance of the
water temperature sensor.
Standard:
Condition
C(60 ℃ )
1/2C(90 ℃ )
H(115 ℃ )
Result and solution:
Normal Repair or replace the harness and connector
If abnormal replace the water temperature sensor
184
Condition
C(60 ℃ )
1/2C(90 ℃ )
H(115 ℃ )
Standard condition
Standard condition
164.5±5Ω
56±3Ω
28.7±2Ω
164.5±5Ω
56±3Ω
28.7±2Ω