Geely CK Series 2007 Workshop Manual page 305

evaporator (6) via the expansion valve (5) for compression and generates high temperature and pressure
vapor which then is cooled into liquid through the condenser (2) and dried in the receiver/drier (3), then
restrict the expansion valve and enable certain amount of refrigerant liquid to be vapored into low tempera-
ture and pressure vapor in the evaporator, meanwhile, absorb large amount of heat and perform heat ex-
change with the air sucked in by the blower, then distribute the cooled air to the vehicle compartments. Cycle
the operation until the compartments gets the desired temperature.
See Table 1 for the Refrigeration system parameter.
Item
Temperature adjustment method
Nominal Refrigeration/W
Displacement/(mL/r)
Compressor
Model
Electromagnetic Clutch Power Dissipation/W
Lubricant /mL
Maximum Airflow/(m
Blower
Airflow adjustment
Motor Power Consumption/W
Dimension/mm
Heat Exchange/W
Condenser
Air Resistance/Pa
Fan Motor Current/A
Fan Motor RPM /(r/min)
Dimension/mm
Evaporator
Refrigeration/W
Thermal Expansion Valve
Drive belt
Refrigerant Fill/g
298
3
/h)
Table 1 Refrigeration system parameter
Parameter
Control the mixture of cool and hot air
4200
108
SW-5H11
45
SW-100/135
400
4th Shift Manual
180
18×302×630
9400
≤ 156
≤ 8
2900±200
86×213×235
4200
Inner Balance 1.5 ton
4PK830
630±20