Geely CK Series 2007 Workshop Manual page 214

Headlamp combinated terminal position diagram
5B
5BA1
5BB1
5BB2
5BB3
5BA3
(a) Inspect light control switch continuity
Inspect each terminal for continuity when the switch is on every position according to the table.
Switch position
OFF
TAIL
If it is not as specified, replace the switch.
(b) Inspect headlamp dimmer switch continuity
Inspect each terminal for continuity when the switch is on every position according to the table.
Switch position
LO
HI
PASSING
If it is not as specified, replace the switch.
(c) Inspect turn signal switch continuity
Inspect each terminal for continuity when the switch is on every position according to the table.
Switch position
Left turn
Straight run
Right turn
If it is not as specified, replace the switch.
9N
9NB1
9NA1
9NB2
9NA2
9NB3
9NB4 9NA3
9NB5
9NA4
Tested terminal
5BB2-5BB3
5BB2-5BB3
Tested terminal
5BB1-9NB5
9NB2-9NB3
9NA1-9NB3
Tested terminal
9NA4-9NA5
9NA4-9NA5-9NA2
9NA5-9NA2
Condition
No continuity
Continuity
Condition
Continuity
Continuity
Continuity
Condition
Continuity
No continuity
Continuity
207