2. Remove the strut rod components
Remove the thread connecting strut rod and No. 2 transverse arm assembly
3. Disassemble the strut rod components
4. Disassemble the rear stabilizer bar assembly
(1) Remove the rear stabilizer bar clamp
(2) Remove the rear stabilizer bar rubber bushing
5. The installation is in the reverse order of the removal.
Caution:
(1) The torque of the bolt attaching the stabilizer bar assembly to the body: 22~25N.m
(2) The torque of the bolt attaching the strut rod components to No. 2 the transverse arm
assembly: 22~25N.m
(3) The torque of the nut attaching the rear stabilizer bar to the strut rod components:
22~25N.m
122