Geely CK Series 2007 Workshop Manual page 339

9
Remove the snap ring under the seat cushion. Open the front seat cushion cover. Remove the inner
coversnap ring. Remove the seat cushion cover.
Non-LOCK
Remove the Headrest and Bracket
Remove the Seatback Snap Ring and Set Bolt
Remove the Headrest Support
2. Installation
1
Install snap ring at the front and rear seat. Be careful not to foul the cover or get it wrinkled;
2
Install the snap ring at the front of the seat back. Install the front seat headrest support;
3
Install the adjuster and track assembly with bolts;
4
Install the coupling plastic gasket. Install the seat back assembly to the seat cushion with bolts and nuts.
Install the snap ring to the rear seat back;
5
Install the adjuster hinge cover with 2 screws;
332
Remove bolts
Remove the Front Seat Adjuster Hinge Cover
Track Assembly
Remove the Track and Adjuster Assembly
Remove the Seatback Cover
Adjuster Assembly