Geely CK Series 2007 Workshop Manual page 281

VI. Troubleshooting Quick Index
DTC Fault Description
65535 ECU
1276 ABS hydraulic pump
283 LF Wheel Sensor
285 RF Wheel Sensor
290 LR Wheel Sensor
287 RR Wheel Sensor
1044 ABS programming error
668 Power supply terminal 30
1130 Abnormal ABS operation Signal is not as specified
VII. Non-DTC Problem Inspection Table Index
Turn the ignition switch to "ON" (With engine off), ABS Warning
Light does not go on
After the engine is started, the warning light does not go off
The brake force on both sides is not uniform
The brake force is insufficient
ABS operates when the brake pedal is slightly
depressed （ vehicle is stationary ）
ABS
abnormal
ABS operates when the brake pedal is slightly
depressed （ vehicle is driving ）
When the ABS operates, the brake pedal vibrates
severely
Brake pedal stroke is excessively long
You need to heavily depress the brake pedal
No DTC output （ failure in communicating with the scan meter ）
274
Diagnosis Result
Damaged
Motor can not operate
Electrical or mechanical
fault
Fault Status
Inspection Reference
Table No. Page
1 275
276
277
2,3,4
278
5 279
6 280
7 281
Inspection Reference
Table No. Page
1 282
2 283
3 284
4 285
5 286
6 287