Geely CK Series 2007 Workshop Manual page 95

E Shaped
Clip Plate
Shift Control
Cables
Replacement
1. Remove shift lever assembly
(1) Pull upwards to separate shift lever assembly leather boot from the auxiliary console
(2) Loosen shift lever set screw with inner hex wrench. Remove the shift lever assembly counterclockwise.
2. Remove the auxiliary console
3. Remove the 4 nuts connecting manual shift assembly and the floor
4. Remove the shift cushion
5. Remove transmission control device assembly
(1) Remove the set nut on the cable seal press plate
(2) Remove the cotter pin and the flat washer connecting the cable and the rocker arm on the transmission
(3) Remove the E-shaped clip plate on the cable bracket retaining the cable
88
Ball Seat
Bottom Bracket
Spindle II
E Shaped
Clip Plate
Spindle I
Wave Washer
Shift Lever Assembly
Support
Conjuction
Plate
Frame
Lever
Bush
Torsion Spring
Ball Pin Seat
Spring Bush
Bush
Ball Pin