2.Notice On Removing The Rear Bumper
(1) Pull the rear bumper out to separate it from the bumper rail.
Warning
If only one side of the rear bumper is separated from the bumper rail, the bumper may drop and
result in body injury. Be careful not to make the bumper drop before separating the rear bumper
from the bumper rail.
3.Notice On Installing The Rear Bumper
(1) Press the rear bumper joint into the vehicle body to connect the rear bumper mounting bracket assembly
and the bumper rail.
(2) Insert the rear bumper end tab into the corresponding hole of the rear fender to flush with the outer
surface.
330