Ambient Conditions, Ventilation, And Mounting Position; Mechanical Data - Kollmorgen AKD2G-S Series Installation Manual

6.2 Ambient Conditions, Ventilation, and Mounting Position

Storage, Transport
Normal operation
Surrounding tem-
perature in operation
Humidity in operation Relative humidity 5 to 85%, no condensation, IEC 61800-2 class
Site altitude
Pollution level
Vibration
Shock
Drive protection
Drive EMC immunity
Mounting
Ventilation

6.3 Mechanical Data

Weight (with X22 and X23)
Width
Height, without connectors
front/back
Height, with connectors
Depth, without connectors
Depth, with connectors
Dimension Drawing see section Mechanical Installation (➜ # 45).
AKD2G-S Installation, Safety 1 | 6 Technical description and data
(➜ # 24)
Environmental class 3K3 according to IEC 61800-2
Internal regen resistor used:
0 to +40 °C under rated conditions
+40 to +60 °C with current derating 3 % per Kelvin
Internal regen resistor not used:
0 to +50 °C under rated conditions
+50 to +60 °C with current derating 2 % per Kelvin
3K3
Up to 1000 m above mean sea level (AMSL): no restriction
1,000 to 2,000 m AMSL: power derating 1.5%/100 m
Maximum altitude: 2000 m AMSL
Pollution level 2 as per IEC 60664-1
Class 3M1 according to IEC 61800-2
Class L according to IEC 61800-2
IP 20 according to IEC 60529
Increased immunity according to EN 61800-5-2
Vertical position, in a cabinet with protection of at least IP 54
Built-in fan in all drive variants
The drive shuts down in case of excessively high temperature in
the control cabinet. Make sure sufficient forced ventilation is sup-
plied within the control cabinet.
Units 6V03S,
6V06S,
6V12S
kg 2.6
mm 76
mm 220/235
mm 303
mm 221
mm <235
Kollmorgen | kdn.kollmorgen.com | Beta, December 2018
AKD2G-Sxx-
7V03S, 6V03D,
7V06S, 6V06D
7V12S
2.9 2.6
75 76
255/272 220/235
340 303
221 221
<235 <235
7V03D,
7V06D
2.9
75
255/272
340
221
<235
33