Ambient Conditions, Ventilation, And Mounting Position; Inputs/Outputs - Kollmorgen AKD-N00607 Installation Manual

AKD-N Installation | 6 Technical description and data

6.5 Ambient Conditions, Ventilation, and Mounting Position

Storage
Transport
Ambient temperature
in operation
Humidity in operation Relative humidity 5 to 95%, no condensation, class 3K4
Site altitude
Pollution level
Vibrations
Environmental area
Mounting position
Cold plate size
Ventilation

6.6 Inputs/Outputs

Interface
Digital inputs (X3)
Digital outputs (X3)
STO input (option DS)
STO outputs (X3, option DS)
24 Kollmorgen | December 2014
➜ p. 14
➜ p. 14
-10 °C to +40 °C under rated conditions
+40 °C to +55 °C with continuous current derating 4 % per Kelvin
Up to 1000 meters above mean sea level without restriction
1,000 to 2,000 meters above mean sea level with current derating
1.5%/100 m
Pollution level 3 as per IEC 60664-1
Class 3M5 according to IEC 60721-3-2
IP65/IP67 according to IEC 60529, UL Type 4x
All orientations allowed, observe preferred position, ➜ p. 45
Aluminum cold plate minimum size:
AKD-N00307: 350x350x10 mm
AKD-N00607: 500x500x10 mm
The drive operates to full ratings, if the mounting surface for the
cold plate is between -10°C and +85°C and the ambient air tem-
perature is between -10°C and +40°C.
Free air convection
Electrical Data
as per IEC61131-2 type 1
l
ON: 15 VDC to 30 VDC, 2 mA to 15 mA
l
OFF: -3 VDC to 5 VDC, < 1 mA
l
galvanic isolation for 30 VDC
l
2 high speed inputs: update rate 2 µs
l
1 standard input: update rate 250 µs
l
as per IEC61131-2 type 1
l
max. 30 VDC, 100 mA
l
short circuit proof
l
galvanic isolation for 30 VDC
l
Update rate 250 µs
l
ON: 18 VDC to 30 VDC, 50 mA to 100 mA
l
OFF: 0 VDC to 12 VDC, < 50 mA
l
galvanic isolation for 60 VDC
l
as per IEC61131-2 type 1
l
max. 30 VDC, 100 mA
l
short circuit proof
l
galvanic isolation for 30 VDC
l
Update rate 62.5 µs
l