Attaching The Belt Clip - Kenwood WD-K10 Series User Manual

2 PREPARATION
2.1 Preparing the Device

Attaching the Belt Clip

The transceiver can be attached to a belt using the supplied belt clip.
Connecting the Clip Microphone
Use a clip microphone (sold separately) for clearer calls even under a noisy environment.
1
Insert the connecting plug into the connecting jack of the transceiver, and secure by turning the cap in the
direction of the arrow.
Note
Be sure to read the instruction manual of the connecting device before using.
0
Make sure to turn off the transceiver before making a connection. Making a connection while the transceiver is turned
0
on activates the protector which disables operation on the transceiver. The clip microphone or headset microphone
adapter is also disabled.
For information on supported accessories of the clip microphone or headset microphone adapter, please refer to the
0
DECT intercom system WD-K10 series website.
http://manual.kenwood.com/en_contents/search/keyword
Screws (supplied)
The screws can become loose.
Tighten again periodically.
Belt clip
Contents
29